| ARB PART NUMBER | APPLICATION(S) |
| 0750001 | Dana 50, 60, and Land Rover Salisbury |
| 0750002 | Dana 30 |
| 0750003 | Dana 44 |
| 0750004 | Dana 35 and Dana 35C |
| 0750005 | Chrysler 8.25" |
| 0750006 | Ford 8.8" |
| 0750007 | GM 8.5"/10 Bolt/AAM 860 |
| 0750008 | Nissan M226 |
| JEEP JL AND JT PART NUMBERS | APPLICATION(S) |
| 0750009 | JEEP JL M186 |
| 0750010 | JEEP JL/JT M200 |
| 0750011 | JEEP JL/JT M210 Rubicon Front |
| 0750012 | JEEP JL/JT M220 Rubicon and New Bronco Rear |
*add the letter B to the end of the part number for the black cover.
DETERMINING OIL LEVEL
The following is a guideline to determine the correct differential oil level in an axle with the standard driveline angle.
- Place the ARB Differential Cover on a bench next to the standard differential cover that you have removed from the vehicle.
- Using a straight edge (electrical tape does a great job), make a line from the bottom of the stand cover's filler hole to the corresponding point on the ARB Differential Cover.
- Hold the dipstick/filler cap on the outside of the ARB Differential Cover so that it is sitting in the position it would be if it was just placed in the filler hole. From this you can determine how far up the dipstick the oil level should be.
- Using a knife or file, clearly mark the dipstick at the desired fill level so you can effectively oil fill to that mark later.
SPARE PARTS LISTS
DANA 60 (0750001)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | D60 DIFFERENTIAL COVER | 0750101 |
| 02 | 4 | 3/8" X 1.5" CAP SCREW | 0750401 |
| 03 | 6 | 3/8" X 0.75" CAP SCREW | 0750402 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 139MM | 0750205 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
DANA 30 (0750002)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | D30 DIFFERENTIAL COVER | 0750102 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 6 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 113MM | 0750203 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
DANA 44 (0750003)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | D44 DIFFERENTIAL COVER | 0750103 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 6 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 113MM | 0750203 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
DANA 35 (0740004)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | D35 DIFFERENTIAL COVER | 0750104 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 6 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 100MM | 0750202 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
CHRYSLER 8.25" (0750005)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | CHRYSLER 8.25" DIFFERENTIAL COVER | 0750105 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 6 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 100MM | 0750202 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
FORD 8.8" (0750006)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | FORD 8.8" DIFFERENTIAL COVER | 0750106 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 6 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 100MM | 0750202 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
GM 8.5" (0750007)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | GM 8.5" DIFFERENTIAL COVER | 0750107 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 6 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 100MM | 0750202 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
NISSAN M226 (0750008)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | NISSAN M226 DIFFERENTIAL COVER | 0750108 |
| 02 | 4 | 5/16" X 1.5" CAP SCREW | 0750403 |
| 03 | 8 | 5/16" X 0.75" CAP SCREW | 0750404 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 113MM | 0750203 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
| 09 | 1 | HANDBRAKE CABLE BRACKET | 0750501 |
JEEP JL/JT M186 (0750009)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | JEEP JP/JT M186 DIFFERENTIAL COVER | 0750109 |
| 02 | 4 | M8 X 30 CAP SCREW | 0750406 |
| 03 | 8 | M8 X 20 CAP SCREW | 0750405 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 100MM | 0750202 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
JEEP JL/JT M200 (0750010)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | JEEP JL/JT M200 DIFFERENTIAL COVER | 0750110 |
| 02 | 4 | M8 X 30 CAP SCREW | 0750406 |
| 03 | 8 | M8 X 20 CAP SCREW | 0750405 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 100MM | 0750202 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
JEEP JL/JT M210 (0750011)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | JEEP JL/JT M210 DIFFERENTIAL COVER | 0750111 |
| 02 | 4 | M8 X 30 CAP SCREW | 0750406 |
| 03 | 8 | M8 X 20 CAP SCREW | 0750405 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 113MM | 0750203 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
JEEP JL/JT M220 (0750012)
| ITEM # | QTY | DESCRIPTION | PART # |
| 01 | 1 | JEEP JL/JT M220 DIFFERENTIAL COVER | 0750112 |
| 02 | 4 | M8 X 30 CAP SCREW | 0750406 |
| 03 | 8 | M8 X 20 CAP SCREW | 0750405 |
| 04 | 1 | MAGNETIC DRAIN PLUG ASSY | 0750201 |
| 05 | 1 | MAGNETIC FILLER PLUG ASSY, 113MM | 0750203 |
| 06 | 1 | DRAIN PLUG O-RING | 160244 (BS113N70) |
| 07 | 1 | FILLER PLUG O-RING | 160245 (BS209N70) |
| 08 | 1 | INSTALLATION GUIDE | 21020751 |
Comments
0 comments
Please sign in to leave a comment.